Weird behavior after M112/M999
-
Hi,
I'm having several issues since I upgraded to 1.19+1.
most of them are disconnects while uploading gcode files. (WiFi signal strength -61dBm)Another issue I just encountered: I just powered the printer on and changed my G31 settings in both config-override and config. I did not accept to reset the duet.
I was connected to the usb with pronsole and did M112/M999, here are the results after I connect again with pronsole[[language]] T:23> connect No port specified - connecting to /dev/ttyACM1 at 115200bps Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: rflowokokError: G-CodError: G-Code buffer '$s' length overflowok Printer is now online Attempt to move the head of a Delta or SCARA printer before homing the towershere are the results after I connect with the web ui:
[[language]] 12:19:24 PMDisconnected. 12:19:22 PMError: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: Error: G-Code buffer '$s' length overflowok Error: GCodes: Attempt to read a GCode float array that is too long: Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Attempt to move the head of a Delta or SCARA printer before homing the towers Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: Error: G-Code buffer '$s' length overflowokError: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: okError: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: overflowokError: G-Code bu Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: okError: G-Code buffer '$s' length overflowok Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: overflowokError: G-Code buok Error: GCodes: Attempt to read a GCode float array that is too long: Error: G-Code buffer '$s' length overflowError: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: okError: G-Code buffer '$s' length overflowokokError: G-Code buffer '$s' length overflowok Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: overflowokError: G-Code buokok Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: rflowError: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: okokokokError: G-Code buffer '$s' length overflowError: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: overflowokError: G-Code buokokError: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: rflowError: G-Code buffer '$s' length overflowError: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: G-Code buffer '$s' length overflow Error: GCodes: Attempt to read a GCode float array that is too long: rflowokokError: G-CodError: G-Code buffer '$s' length overflowok Attempt to move the head of a Delta or SCARA printer before homing the towersanother M999 in pronsole and everything is fine, it seems very weird and it's not the 1st time it happens to me.
-
Thanks for your report. I will correct the error message in firmware 1.19.1. Looks like the Duet received some junk on one of its GCode input channels.
