Heater and fans not working.
-
How is it revision 1? Bart only has V0.5 in stock!
-
@tecno how is what revision 1? You have a revision v0.5 board, as it shows in your photos. There’s only tiny differences between v0.5 and v1, mainly to aid manufacturing; see https://duet3d.dozuki.com/Wiki/Duet_3_Mini_5plus_Hardware_overview#Section_Revision_1_Num_0
I guess RepRapWorld are still selling slightly older stock, which is fine.Ian
-
OK thanks.
-
Please enter the Warranty Authorisation code (WAC) you have been sent by email from Duet3D.
droftarts MODERATOR 12 May 2021, 10:22 @tecno that’s perfect, thanks. I approve a warranty replacement. Please contact the seller and follow their warranty process, quoting this thread as authorisation. Apologies for the inconvenience.This does not appear to be a valid Duet3D Warranty Authorisation Code
Filling this document
https://docs.google.com/forms/d/e/1FAIpQLSdXpbRCNxUc2j_OePtuWdwyKPJ9VEg2Ohq_80f-VCZ4SCJJ9w/viewform -
@tecno oops, sorry, we’ve just changed how we do warranty authorisation.
Please send an email to warranty@duet3d.com and CC your reseller. Include a link to this forum thread and the details of your original purchase. You'll receive a reply with a form to fill out and warranty authorisation code.
Ian
-
Already filled the form without WAC (omitted the code so I could fill the rest) and cc to Bart.
So I think you can fill the blanks inhouse.
Cheers
Bengt -
Yes, no problem.
