macros in Simplify3d

r123

@nexxcat and you have added a ".g" to the filename. When I tried that in DWC it didn't accept it? So is the syntax different when sending from the slicer?

NexxCat

@r123 said in macros in Simplify3d:

@nexxcat and you have added a ".g" to the filename. When I tried that in DWC it didn't accept it? So is the syntax different when sending from the slicer?

Not sure why DWC wouldn't accept that. All my macros have a .g extension.

Here is my full start gcode from S3D, if that helps

G28					; Home all
M190 R[bed0_temperature] 		; Heat the bed to temperature
G4 S60					; Sleep for 60s to allow heat soak
M290 R0 S0				; Reset baby-stepping to 0
G32					; Level the bed
G28 Z					; Re-home Z
G29 S0					; Probe the bed
G1 X-100 Y-100				; Move XY back to home
G10 P0 S[extruder0_temperature] R160	; Heat nozzle to print temperature
M116					; Wait until temperatures are reached
M98 P"0:/macros/prime_nozzle.g"		; Run nozzle prime macro

r123

@nexxcat ah, then I should be giving my macros a ".g" extension in the name which also appears in DWC?

so call mine "Dock_Wipe.g" in DWC?

NexxCat

@r123 said in macros in Simplify3d:

@nexxcat ah, then I should be giving my macros a ".g" extension in the name which also appears in DWC?

so call mine "Dock_Wipe.g" in DWC?

It's worth a try

jay_s_uk

@r123 when creating a macro its not explicitly given a file extension.
So if you called it prime_nozzle (and thats what its shown as in DWC), thats a different file to prime_nozzle.g

r123

@jay_s_uk it works without the extension in DWC. But does it work without the extension when called from a gcode file. For me it didn't. Planning to try on next print renaming to .g and calling with .g . Unless hear otherwise!

r123

Yay, that's it. The ".g" suffix is obligatory on the filename if you want to call it from a G-code file. However it's not if you want to just call the macro from DWC shortcut list, or if you want to call it from DWC's "send command window" using a M98 command etc.. Which is somewhat confusing to beginners.

Additionally, spaces and capitals are OK (human friendly);

[And, in case anyone's reading, I noticed that in the guide the M117 command does not require "" around the message it sends. However in most recent versions of firmware/DWC it does!]

r123

THanks @NexxCat @jay_s_uk

dc42

@r123 said in macros in Simplify3d:

Yay, that's it. The ".g" suffix is obligatory on the filename if you want to call it from a G-code file.

Normal practice is not to use a '.g' suffix on user macros, because the full filename of the macro (including any extension) less any leading digits followed by underscore is what should be displayed in the list of macros in DWC and on PanelDue.

When calling a user macro form M98 you will need to use the exact file name, including any leading digits and underscore.

r123

@dc42 it seems that DWC parses out any ".g" suffix on the filename for display purposes in the Dashboard (though not the macro file list).

As above, I found that if called a macro "my macro" it would not call from a gcode file produced by s3d start script.

(with M98 P"path/my macro" )

But if I called it "my macro.g" then it would call from the gcode file

(with M98 P"path/my macro.g")