move.compensation.probeGrid values not populated RRF 3.3beta2

[OwenD]

Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.3beta2 (2021-03-10)
Duet WiFi Server Version: 1.25
Duet Web Control 3.3.0-b2

I have the following M557

M557 X30:200 Y10:180 S30

However none of the mins and maxs values are populated

[dc42]

I think that may be normal when you don't have a height map loaded. Was it different when you were running previous versions of RRF?

[OwenD]

@dc42 yes, it was different on previous versions.
I was using minX/maxX etc in homeall.g and bed.g to calculate the centre of the bed and the extremes for twin z level.
I can hard code these, but the code was portable before.