rasp pi 4 and openCV, TAMV install issues
-
i switched from a rasp pi3 to a pi4. i followed the instructions from https://blackbox.dozuki.com/Guide/Setting+Up+Automatic+Tool+Offset+Calibration+Via+TAMV/29
i am not getting the welcome screen from Danal and it is not prompting me for a IP address or login.
i have formatted a 32GB sandisk microsd card with raspbian imager, and loaded raspbian OS full desktop version and also on my last attempt, loaded Duetpi full. i have the same problem on both.
is there supposed to be another way to do this?
-
Your screen shot is far too small to see anything. If we could see it maybe someone might have an idea. Unfortunately, Danal is no longer with us.
-
i updated the first post with a link to the image. sorry about the quality of the first one. didn't know it was bad. i read somewhere that a duet2 running RRF3 wont work. however, there was a testDWA.py file inside the TAMV folder that was able to detect my duet2wifi RRF3 board when i entered my IP manually and it was able to display the correct X Y and Z position which i found was odd considering my machine is not a duet2 on RRF2 or duet3 on RRF3.
