Quick question, PAUSE from gcode
-
For each layer in my clay printer, I need to pause the print and refill material.
So I have put "M98 P/sys/pause.g" in my layer change gcode, but the printer continues after executing the pause.g code.
Is there a gcode to make it halt and wait for me to press "resume" ?
Kulitorum
PS: We are test printing a large test today, so please answer quick
-
Ah, found it, M25 does the trick
-
You are supposed to use M226 from with the gcode file itself, but in recent firmware versions M25 works too.
