RRF3 Beta version(s) issue

[A Former User]

I have come upon an issue with ALL the Beta Versions of RRF3.

if I chose the option "print again" the printer starts to "stutter" and very slowly attempts to reach X & Y Maximum (if left to it's own devices) the head will continue and try to drive itself in to infinity of X & Y without stopping.

The only thing that clears it is a reboot.

I can replicate the issue across numerous printers, a rollback to RRF 3.1.1 appears to rectify the issue.

[dc42]

Which Duet(s)? Standalone or with SBC?

[A Former User]

@dc42

A Duet 2 (wifi), Duet-3/SBC and Duet-3 in Standalone mode

All my printers are currently on longish prints, i will try to take a video of one doing its thing later