FYSETC Mini 12864 @ Maestro - HowTo?

[tcj]

Hi,
how do I have to connect a FYSETC Mini 12864 to a Duet Maestro with the latest Firmware 3.2?
I'm sorry, but I don't get it over the long threads and even https://duet3d.dozuki.com/Wiki/Connecting_an_LCD_control_panel#Section_12864_display_using_ST7567_controller_chip does not really help

Thank you in advance

[Veti]

use the M918 command with display type parameter P2.

[tcj]

I am talking about the wiring
That does not seem to be straight forward

[dc42]

I will update the page you linked to shortly, to give the pin connections that are currently occupied by the "qq" placeholders.

Note, the Maestro does not support the RGB LEDs on version 2.1 of that controller.

[tcj]

@dc42 Take your time.