Duet3+SBC random restart while printing "AssertionFailed"
-
@Marco-Bona said in Duet3+SBC random restart while printing "AssertionFailed":
@dc42,I'm having another problem, I wanted to test with a newer firmware version, but I can't get the updates with "sudo apt-get update \ sudo apt-get upgrade". Do you have any idea?
@chrishamm is the expert on that area.
-
@dc42, @chrishamm, I update the situation:
-I managed to install the 3.2 beta2 package (sorry but I missed a key point in the guide) and the problem occurred again.
-I ran firmware in standalone mode and printer works surprisingly well indeed I dare say it works better than with SBC connected. The printer seems to respond better to the gcode and I noticed that all messages are displayed on paneldue that were not present with the SBC connected.
Not to argue and also seeing the problems that other users encounter the question that arises is are you sure that duet3 + SBC works as it should?
Are you sure that no changes have been made to what is currently the 3.1.1 revision that was not problematic before?
I am now doing a test print in standalone mode and it seems the printer is working fine.
I will keep you updated if the problem occurs again even in this condition.
