G29 command doesn't do anything on version 3.2 beta 1
-
Hello,
I updated my printer to the 3.2 beta 1 version and I have a problem with the G29 command.
Board: Duet 3 MB6HC (MB6HC)
DSF Version: 3.2.0-beta1+1
Firmware: RepRapFirmware for Duet 3 MB6HC 3.2-beta1 (2020-09-15b1)
Duet Web Control 3.2.0-beta1+2The G29 command doesn't do anything anymore (neither does the "Run Mesh Compensation (G29)" button in DWC). But G29 S0 works as expected.
I don't have a mesh.g file so if I understand correctly the changelog:
G29 with no S parameter now runs file sys/mesh.g if it exists; otherwise it behaves like G29 S0 as before
G29 is supposed to act like a G29 S0, no?
-
G29 on its own now runs mesh.g I believe.
Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
-
@jay_s_uk Yeah that's what the changelog seems to indicate but I don't have a mesh.g file so I thought it was supposed to behave like a G29 S0
-
@jay_s_uk said in G29 command doesn't do anything on version 3.2 beta 1:
G29 on its own now runs mesh.g I believe.
If mesh.g is not found then G29 should behave the same as G29 S0. It sounds like this part of the functionality does not work when using an attached SBC.
