File Corruption with uploading large files over web interface
-
I'm having trouble getting a 212MB file you upload over the web interface, It keeps getting corrupted and I get errors such as Error: Uploaded file CRC is different (6acd12c1 vs. expected d18ebd88).
I am using the SD card that came with the duet and I am running RRF3.2beta.
Here is the M122 output.=== Diagnostics === RepRapFirmware for Duet 3 MB6HC version 3.2-beta running on Duet 3 MB6HC v1.01 or later (standalone mode) Board ID: 08DJM-956L2-G43S8-6J9FA-3S86J-1B3QF Used output buffers: 1 of 40 (23 max) === RTOS === Static ram: 154528 Dynamic ram: 163140 of which 24 recycled Exception stack ram used: 320 Never used ram: 75204 Tasks: NETWORK(ready,288) ETHERNET(blocked,432) HEAT(blocked,1108) CanReceiv(suspended,3424) CanSender(suspended,1488) CanClock(blocked,1436) TMC(blocked,196) MAIN(running,4536) IDLE(ready,76) Owned mutexes: === Platform === Last reset 01:19:03 ago, cause: software Last software reset at 2020-09-10 18:58, reason: User, spinning module GCodes, available RAM 75548 bytes (slot 0) Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x04437000 BFAR 0x00000000 SP 0xffffffff Task MAIN Error status: 10 MCU temperature: min 30.1, current 32.3, max 32.8 Supply voltage: min 23.9, current 24.0, max 24.0, under voltage events: 0, over voltage events: 0, power good: yes 12V rail voltage: min 12.1, current 12.2, max 12.3, under voltage events: 0 Driver 0: standstill, reads 39250, writes 15 timeouts 0, SG min/max 0/0 Driver 1: standstill, reads 39249, writes 16 timeouts 0, SG min/max 0/0 Driver 2: standstill, reads 39251, writes 15 timeouts 0, SG min/max 0/0 Driver 3: standstill, reads 39252, writes 15 timeouts 0, SG min/max 0/0 Driver 4: standstill, reads 39252, writes 15 timeouts 0, SG min/max 0/0 Driver 5: standstill, reads 39257, writes 11 timeouts 0, SG min/max 0/0 Date/time: 2020-09-10 20:17:19 Slowest loop: 1195.04ms; fastest: 0.15ms === Storage === Free file entries: 9 SD card 0 detected, interface speed: 25.0MBytes/sec SD card longest read time 4.5ms, write time 364.0ms, max retries 0 === Move === Hiccups: 0(0), FreeDm: 375, MinFreeDm: 375, MaxWait: 0ms Bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1 === AuxDDARing === Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1 === Heat === Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1 === GCodes === Segments left: 0 Movement lock held by null HTTP is idle in state(s) 0 Telnet is idle in state(s) 0 File is idle in state(s) 0 USBchan is idle in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 0, running macro Aux2 is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === Network === Slowest loop: 1194.75ms; fastest: 0.03ms Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions HTTP sessions: 1 of 8 - Ethernet - State: active Error counts: 0 0 0 0 0 Socket states: 5 2 2 2 2 0 0 0 === CAN === Messages sent 19008, longest wait 1ms for type 6018 === SBC interface === State: 0, failed transfers: 0 Last transfer: 4743972ms ago RX/TX seq numbers: 0/1 SPI underruns 0, overruns 0 Number of disconnects: 0 Buffer RX/TX: 0/0-0Any ideas? I would really like to be able to upload files without cutting power to the machine to remove the SD and losing state.
-
Does this occur with 3.1.1?
What DWC version are you running? -
It occurs with 3.1.1 also, DWC is 3.1.1
-
Can you try with a different SD card?
Does it happen with just that file or with any large file of that size?
