Sammy-C21 CAN errors
-
It's been over a month since I tested the SammyC21 firmware build. I've just built and loaded the debug build through ICE and I am getting the same issue - no CAN connection. I'll fix this today if i don't run out of time.
-
Currently, the release build works (loaded over CAN by the bootloader), but the debug build loaded via the ICE doesn't.
-
I've just fixed the SammyC21 debug build and committed the fix to github. The main change was in the .cproject file, and I had to do a clean and then a build to get the change included in the binary.
-
Works, Thanks a million @dc42, now on to calibration.
