e3d Big Box with IDEX Modification Manual Bed Leveling

[Sebinski]

Hi Guys,

on my Big Box with IDEX-Modification i installed my IR-Probe at the side of the Printing bed to Home my Z-Axis. So in my M558 Command P1 for a IR-Probe is active. But because the Probe is active but stationary and can't move in XY i can't use G29 for an automatic Meshleveling. Is there still a possibility to create a heightmap.csv manually?

Cheers

Sebastian

[dc42]

Yes, send M558 P0 to change the Z probe type temporarily to zero.

[Sebinski]

thanks for the quick answer