5v Inductive endstop’s

[TheLightSpeed]

Hey! So I have 5v Endstops. I would like to keep 5v inductive Endstops. I know I can use Pin1 of the expansion header for a 5v source while keeping the ground and signal hooked to the regular pins. My question is obviously I have a X, Y and Z endstop and only 1 5v pin. Can I connect all three 5v pins to that one pin on the expansion header without damaging it? I’m assuming 3.3v won’t be enough to power them.

Thanks.

[Veti]

only if you have a duet wifi 1.04

[dc42]

@Veti said in 5v Inductive endstop’s:

only if you have a duet wifi 1.04

Or a Duet Ethernet 1.04, or Duet Maestro, or Duet 3.

[TheLightSpeed]

@dc42 I do David thank you!