Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    It just Will Not work

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    3
    169
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • wayne thorntonundefined
      wayne thornton
      last edited by

      It will not connect to Yat. I have been over this 10 times plus. Is there some way i can get one that will connect to Yat.

      fcwiltundefined 1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @wayne thornton
        last edited by

        @wayne-thornton said in It just Will Not work:

        It will not connect to Yat. I have been over this 10 times plus. Is there some way i can get one that will connect to Yat.

        Perhaps a little more information will help us.

        Describe what you are doing in some detail.

        Frederick

        Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

        1 Reply Last reply Reply Quote 0
        • droftartsundefined
          droftarts administrators
          last edited by

          See: https://duet3d.dozuki.com/Wiki/What_to_do_if_your_Duet_won't_respond
          Work through this guide, and give us details of what does, and does not, work.

          Ian

          Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA