CNC style Pendant

tntjet

Thank you David !

dc42

If you had the 6-axis version, it would control the V and W axes too. You can change which axes positions 4, 5 and 6 control in the firmware. It's an Arduino sketch, so easy to change and upload.

tntjet

Thats awsome David , if wanted to change the increments on the rotary encoder feed switch to .01, .1, 1 what would I need to change?

dc42

@tntjet said in CNC style Pendant:

Thats awsome David , if wanted to change the increments on the rotary encoder feed switch to .01, .1, 1 what would I need to change?

Lines 268-270 of the .ino file currently read:

    output.print(distance/10);
    output.write('.');
    output.print(distance % 10);

I think changing them to this should work:

    output.print(distance/100);
    output.write('.');
    output.print((distance % 100)/10);
    output.print(distance % 10);

tntjet

Thank you David , i did try the changes it gives me the same increment on the first and second switch positions . i have reverted back to your original sketch . I appreciate your effort and responses.

FelixH

Yesterday I noticed something weird while using the pendant. The multiplier knob was set at x10 and, not thinking about it, I tried to move the Z axis. Because I turned the wheel too much, I got a message on the display telling me to chill out (paraphrasing here) because I wanted to move more than the axis allows. So far, so good. However the X axis moved a little bit instead, even though the Z axis was selected on the axis knob. Now that's weird. Once I switched to x0.1 multiplier, the Z axis moved ok.
Knowing that, I'll be more careful from now on, but I am really curious if this is a "global" bug or it is just me.

I am using an Arduino Nano and I changed the resistor on it in order for the bypass of the display to work. The Arduino Pro Micro I ordered came when the Pendant was already assembled, so I saw no reason to open it up again. Also, I did not update the firmware to the latest version, as I understood it was only Pro Micro related and I didn't see a point on doing it.

Cheers!

jhonf441

@FelixH Hello, I don't use pendant but I have noticed that sometimes when I am moving the machine on the Y axis it moves a little on the positive X axis and vice versa

dc42

@jhonf441 said in CNC style Pendant:

@FelixH Hello, I don't use pendant but I have noticed that sometimes when I am moving the machine on the Y axis it moves a little on the positive X axis and vice versa

That will happen if you use skew compensation, M556 in config.g. It can also happen on a CoreXY machine that isn't constructed or set up properly.

FelixH

Hi all,

I have run to a problem with the Pendant-PanelDue configuration in which one of the macros I have does not respond and neither does the actual GCode of the macro sent by the PanelDue's console. When the pendant is not plugged in, it works just fine, apparently. It also works fine if the macro is executed via the web interface from a computer. The code of the Macro is:

G28 Z
G54 G1 X0 Y0 F1500

Which just moves the tool back to the WCS #1 origin. When I execute the macro, only the G28 Z command is executed. On the screen or PanelDue there is no warning or message.

Has anybody experienced the same or similar?

PS: wouldn't it be a good idea to create a Pendant section on the forum??

dc42

I find that very odd. PanelDue just sends the M98 command to run the macro. The lines from the macro file are fetched from the SD card by the Duet.

Are you sure that this is reproducible?

FelixH

I am positive. Yes. I had the problem for many day and just two days ago I found out that it was working from the web interface. Apparently all other macros work just fine.

dc42

What is the name of the macro file?

FelixH

@dc42 the macro name is 007-Go to WCS #1 Zero

the curious thing is that the G28 Z command is executed. Sorry I forgot to mention that.

dc42

Can you try renaming the macro to something which only has letters and digits in the name?

Which version of PanelDueFirmware are you using?

FelixH

I have to get out for a couple of hours, but I will try that when I'm back. The PanelDue firmware is not the most recent one. I will update it, just to be safe.

FelixH

I just checked before leaving. PanelDue Firmware is 1.23.2

dc42

Yes you may need to update it, because I AFAIR 1.24 surrounds the M98 macro file argument name in quotes, and 1.23 does not. The PanelDue pass-through may be relying on that if the filename contains special characters such as #.

FelixH

changing the name did the trick. Thanks! I will now update the firmware anyway. I find it curious that the G28 Z command dis actually work.

CTRDevelopments

I am really keen on this, coming from cnc world. Would it be possible to somehow allow the pendant to also operate baby stepping in z? Nit sure if we can have an additional selector in the pendant that selects baby step?

FelixH

@CTRDevelopments the pendant shown on this thread, that from ebay, has a 4th axis setting on the knob. Maybe you could implemented there?