Baby stepping differences between PanelDue and DWC

[stuartsm]

I'm still coming to grips with Duet and loving the journey.

I've just noticed that on PanelDue, the baby steps are 0.02mm, but on DWC, they are 0.05mm.

Just wondering what the logic behind this is. I'm finding 0.05 is about half the thickness of the paper I use for levelling. 0.02mm seems more appropriate for dialling in the level when printing the skirt.

[PaulHew]

FYI - You can change the Baby Steps in the DWC in 'Settings' - 'User Interface' tab, just incase you did not know.
HTH

[dc42]

@stuartsm said in Baby stepping differences between PanelDue and DWC:

0.02mm seems more appropriate for dialling in the level when printing the skirt.

That's what I thought when I chose 0.02mm for PanelDue.

[stuartsm]

@dc42 Thanks for the confirmation.
@PaulHew I didn't know. I do now. Thanks for the information. Nice to have them in sync.