Impulse buy why do I do it !
-
Hi all,
I think I may have made a mistake with an impulse buy on 2 motors to run a Z axis on a Corexy printer I have just started building.I read the the information on buying Nema 23's in the selecting motors section on the site.
I have purchased 2 Nema 23 Bipolar 0.9deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires.I have taken the 2.8A literal as a max just looking for a yay or nay please.
-
@stevo said in Impulse buy why do I do it !:
Hi all,
I think I may have made a mistake with an impulse buy on 2 motors to run a Z axis on a Corexy printer I have just started building.I read the the information on buying Nema 23's in the selecting motors section on the site.
I have purchased 2 Nema 23 Bipolar 0.9deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires.I have taken the 2.8A literal as a max just looking for a yay or nay please.
They sound similar to the 1.8deg Nema 23 motors that I use for testing the Duet WiFi/Ethernet at max current. They will be fine at between 2.0 and 2.4A current. Use 24V power, or keep the speed low.
-
@dc42 said in Impulse buy why do I do it !:
@stevo said in Impulse buy why do I do it !:
Hi all,
I think I may have made a mistake with an impulse buy on 2 motors to run a Z axis on a Corexy printer I have just started building.I read the the information on buying Nema 23's in the selecting motors section on the site.
I have purchased 2 Nema 23 Bipolar 0.9deg 1.26Nm (178.4oz.in) 2.8A 2.5V 57x57x56mm 4 Wires.I have taken the 2.8A literal as a max just looking for a yay or nay please.
They sound similar to the 1.8deg Nema 23 motors that I use for testing the Duet WiFi/Ethernet at max current. They will be fine at between 2.0 and 2.4A current. Use 24V power, or keep the speed low.
Many thanks for the reply very much appreciated.