shorted board unable to connect via usb.
-
I shorted my board via my smart effector was unscrewing the hotend and allowed my heater leads to swing around and on the underside of the effector shorting something. I cant connect to the board via usb or wifi at this point. with usb connection i get the three red leds and the one green. This is version 1.02, duet wifi any ideas if this is repairable or should i cut my losses and buy new?
-
Is w3drk still the only repair guy in the states. I sent him a PM but he does to appear to be active. Any assistance would be apreciated.
-
The fact that the green led is lit is a good sign. Have you tried fallback procedure #3 in the firmware update wiki page, i.e. erase the firmware and look for the Bossa port?
-
no bossa port, nothing pops up, computer acts as if nothing i plugged in. tried a couple different cables and all my ports guess i could try a different computer.
-
@nursling said in shorted board unable to connect via usb.:
Is w3drk still the only repair guy in the states.
He's the only one I know of.
-
If you contact us at Filastruder (use the contact form on the website), we'll find a solution for you.
-
Thank you, Message sent to Filastruder.
-
@elmoret Such good support. I'm buying from you guys for my next one. I had the same type of issue with my first one and got nowhere with my country's reseller.