Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    My monster delta

    Scheduled Pinned Locked Moved
    My Duet controlled machine
    4
    6
    777
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Monster Deltaundefined
      Monster Delta
      last edited by Monster Delta

      Hi I've spent 2 years on this printer and now its finished I'm pretty pleased with the redults. Build volume is 550 x 800 0_1548852425786_20190130_124257.jpg
      0_1548852407385_20181204_204933.jpg 0_1548852418125_20190130_124232.jpg 0_1548852447003_20190130_124220.jpg !0_1548852897454_20190130_124309.jpg

      1 Reply Last reply Reply Quote 3
      • TBSundefined
        TBS
        last edited by TBS

        It looks really great.
        Can you show a printed benchy please?

        Monster Deltaundefined 1 Reply Last reply Reply Quote 0
        • dc42undefined
          dc42 administrators
          last edited by dc42

          Impressive! What motors are you using?

          Your print quality may be limited by the long Bowden tube. However, I recently implemented support for additional towers on delta printers. As you have a hexagonal frame, you could mount the extruder drive on an additional driven carriage running on a rail on one of the unoccupied vertical extrusions, so that the extruder drive on the carriage maintains a constant distance from the centre of the effector. This would allow you to use a shorter Bowden tube between the extruder and the effector.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          Monster Deltaundefined 1 Reply Last reply Reply Quote 1
          • Danalundefined
            Danal
            last edited by

            Fantastic! I love seeing these big deltas. Congratulations, a very slick looking, and no doubt working, printer.

            Delta / Kossel printer fanatic

            1 Reply Last reply Reply Quote 0
            • Monster Deltaundefined
              Monster Delta @TBS
              last edited by

              I'll have to print one and then I'll upload an image

              1 Reply Last reply Reply Quote 0
              • Monster Deltaundefined
                Monster Delta @dc42
                last edited by

                @dc42 I'm using nema17 steppers 1.8 step angle. I'll definatly have to look into using an extra axis for the stepper, i did play with a flying extruder for a bit but couldn't get on with it but that sounds like a much better solution

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA