Unsolved Hide unused heater channels?[PanelDue 5]

[Martin1454]

Hi there! - I just updated my PanelDue (5inch) to the latest release (1.22.1), and have a few things I want to address:

First of all, It looks like some of my macros are displayed in a wierd way on the initial screen? Why is that?

Secondly: My system have a heatbed, and 2 extruders - I use heaterchannel 0, 4 and 7 for these 3 heaters - But as you can see in the "current *C" line, there is also displayed the "temperature" for all the channels i do not use - is there a way to dissable those?.

Br. Martin

[dc42]

The current PanelDue firmware assumes that heater 0 is the bed and that hot ends use heaters 1, 2, 3... in that order. I can look at changing the data sent by RRF to include only those heaters actually configured. I may have this available as a beta release soon. In the longer term I intend to change PanelDue to retrieve and use the tool definitions, as DWC does.

[Martin1454]

@dc42 Oh, so I have 2 options - Either change the hot ends to channel 1 + 2, or wait for update right?

[dc42]

@martin1454 said in Hide unused heater channels?[PanelDue 5]:

@dc42 Oh, so I have 2 options - Either change the hot ends to channel 1 + 2, or wait for update right?

Correct.

[Martin1454]

@dc42 Perfect - thanks - Any advice on the Macros showing up on the screen?

[resam]

I think this is the same issue as reported here: https://github.com/dc42/PanelDueFirmware/issues/39

nikscha created this issue in dc42/PanelDueFirmware

closed wrong layout when using only heater 2 #39