Paneldue button location incorrect

[HenryDara]

Paneldue 5" buttons are offset too low on display. Always have to press above the button by about 4-5mm, makes it difficult to control from the Paneldue. This problem is from the start on this unit which I purchased about Nov 2018.

[resam]

Run the Calibrate touch routine from the Setup tab on your PanelDue.

[HenryDara]

@resam Thank you. Now I will go have my eyes checked. Dont know how I missed that.

[bret4]

Even with calibrate my big fingers sometimes push the wrong buttons on the touch screen. I have used a touch stylus at times to make it easier.

[dc42]

@bret4 said in Paneldue button location incorrect:

Even with calibrate my big fingers sometimes push the wrong buttons on the touch screen. I have used a touch stylus at times to make it easier.

Try using the tip of your fingernail.