12864 Display SD Print subfolder screen update
-
Hi dc,
When entering a subfolder on the display from a file list, the screen does not update until you rotate the encoder.Not a big issue at all since there is a clear work around more so just to report the issue. Currently using 2.02RC5
-
@incogizmo said in 12864 Display SD Print subfolder screen update:
When entering a subfolder on the display from a file list, the screen does not update until you rotate the encoder.
Thanks, on my list to look at for 2.05RC6.
-
This is fixed in the forthcoming 2.02RC6 release. Thanks for reporting it. Returning to the root from a subfolder had the same problem.
-
@dc42, is there a way to assign command to long press of a button? A bitmap conversion guide would be handy as there is no info and all current menus had a line at max as image i think.
-
Are you saying that you want to execute different commands depending on whether the button press is short or long?
-
DC42, i am asking if a command could be assigned to long press. My prusa has this handy option, when you long press a button, it would allow to jog Z axis by 1mm steps when turning rotary encoder, cw up ccw down.
-
So do you mean than when you select a numeric field, the size of the adjustment steps should depend on whether you did a short or a long press? Or something else?
-
I have both, prusa menu and standard marlin 12864 menu and there is no need to have options to move axis by 1, 10, 100mm. Could be my preference but its a pain going through that many menu options. To sum up:
Move axis >> Move X or Y or Z >>turn enc cc or ccw to move axis by 1mm(lcd shows current position) >> press enc_btn to go back
For the main screen
Main screen >> long press enc_btn >> move Z by 1mm increments up or down(lcd shows current position)>>press enc to go back.
You can print good enc knob so the navigation of axis is swift and comfy. I was mentioning that some time ago as physical input feedback and why i like it more vs. lcd touch.
Basically maestro board is everything i wanted and missed in wifi. BTW, ordered one from duet3d.Menu system is a bit challenging for me to program but its a matter of time. Another thing would be to have a simple way to convert bitmaps to compatible format, even command line tool would help a lot to shift development of menu systems.
-
You can already move the axes directly using the encoder in firmware 2.02RC5, as I expect you know already. The movement increment is 0.02mm for Z and 0.1mm for other axes. How would it be if I make the increment 1mm on all axes after a long press instead of a short one?
