Multi z amperage and bed leveling
-
Hello!
Today I built my Z axis! Do I have to set the amps for each motor individually?
If so, how do I do that? If not, can I still do it?https://www.youtube.com/watch?v=hkIaf9Sy-2A
I changed the title
-
If you use multiple Z motors connected to separate drivers specified using M584, then the Z motor current that you specify in M906 will be applied to all of the Z motor drivers. The M906 command must come after the M584 command.
-
Ty very much!
-
Are my measurements at the correct locations?