Homing z axis with z probe
-
When I am homing my z axis the axis's i assume are moving to the first probe point but what they do is run into the end-stops and just grind against it. How would i fix this? i can post any files you need just ask. Here is my config and z home file though
Also what P command should i use in M558 to define what probe i have. My probe is this
https://www.amazon.com/gp/product/B00S50O152/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
-
I answered the first question in your other post a few minutes ago. Regarding the second question, see https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe#Section_NPN_output_normally_open_inductive_or_capacitive_sensor.
