Smart effector power connector
-
Looking for a good place to buy the correct connector and pins for the smart effector 6-pin black power connector (cable side, the same ones provided when you purchase the effector). If anyone has a link it would be most appreciated.
I have seen some that I think are the right one but just not sure.
Thank you in advance.
-
I ordered this when I just replaced mine. Worth it.
https://www.digikey.com/product-detail/en/molex-llc/0451320610/WM16121-ND/6208008Mouser also has a higher end one:
https://www.mouser.com/ProductDetail/Molex/245132-0610?qs=sGAEpiMZZMsB9HsreUc%252biT1kJrdVkr5yWzvQ3Oh8lVY%3DAnd both of them sell just the connectors if you want one. Microfit Molex 3.0 6 circuit
-
Yeah..those are nice cable assemblies, the first is almost a meter long.
I like make my own cables...I used a "Dupont" crimping tool I bought on eBay for my distributed UFO Data collection network that I'm developing. I used the crimpter to fabricate my DUET3D & SE (Smart Effector) cables. It works great for crimping those MicroMate pins...
USa eBay product title, "Dupont Pin Crimping Tool 2.54mm 3.96mm KF2510 28-18AWG Crimper - US Ship" ~$18 bucks.
eBay Item Nr: 271236300179Thanks for your advice, much appreciated.
3mm
Los Angeles, Ca, USa -
@mysta thank you, gonna try the mouse one, I think that will help tidy things up.
-
Let us know how the Mouser cable works out. I'm wondering if the strain relief will make it stiff.
-
The digikey are perfect, the cable quality itself is really nice for the fast/constant movements of the delta effector so I'm really loving it, looks nice too. I just had way too much issue crimping the cat6 double wire and getting it to fit even though I have a good crimper. I've never really had that problem before. Also the cable fits a lot better(clips in and out with no pressure)
