confirm of jumpers and fans

[wepollock]

Just a hand holding request to confirm so I don't mess up

I have the board positioned vertically in a project box; with the steppers towards top (north).
(there is a fan pointed to the back of the card

Power in positive is the connection closest to the steppers.
Fan negative is left towards the SD card

Being a delta Z will be the furthest most top right (north east) connection.
With one stepper the jumpers in Z2 remain in place.

I am going to use internal 12v from the power supply for fans -
---vfan jumper select should be rightmost two pins.

And I am going to use internal 5v for the board
---the middle jumper pair should be closed, the rightmost jumper pair empty.

[dc42]

Yes that's all correct.