[3.6] A very minor, cosmetic, DWC UI suggestion

[stuartofmt]

I tend to use the webcam iFrame for another purpose.
In my case I link the webcam UI to a url that controls an IP relay which turns on / off the mains to the printer power supply.
I use SBC with a Pi that is always powered on - so I have DWC always available.
This way I can switch on / off the printer from DWC versus the terribly onerous task of opening another tab in the browser. So lazy am I that I also use the *Physical Printer' tab in Prusa Slicer ... but it does give a nice, all-in-one, feel.

Since the webcam UI is more-or-less generic, it would be nice (and nice only) to be able to label it as other than Webcam Surveillance in the display and as Webcam under the Jobs menu.

[dc42]

@stuartofmt that's one for @chrishamm.

[stuartofmt]

@dc42 said in [3.6] A very minor, cosmetic, DWC UI suggestion:

@stuartofmt that's one for @chrishamm.

Sorry - at the time of posting I conflated everything 3.6.0-beta in my mind. I'll repost in the DWC forum