M581 R-1 behavior
-
Hi all,
I'm setting up triggers on my duet machine. I have an issue where a trigger may be tripped multiple times, like when inserting filament. This causes messages to be stacked, which is a pain. I am assuming that the way to fix this is to temporarily disable the trigger with the R-1 parameter in M581. The documentation says that "R-1 temporarily disables the trigger". What determines when the trigger is re-enabled? Do I have to recreate the trigger with M581?
Thank you
-
@Surgikill yes you need to re-enable the trigger using parameter R0, R1 or R2.
