peltier cooler with duet3 6hc
-
I want to have a cooling head for a paste extrusion,
Which need 4 -10 deg c, I want to use Thermo electric cooler, how to integrate?
Do duet3d boards support this? -
Do you have a spec sheet on the TEC you want to use?
-
@Phaedrux https://robu.in/product/xd-1037-dc12v-60w-semiconductor-refrigeration-sheet-refrigerator-diy-refrigeration-plate-low-power-radiator-system/?gad_source=1&gclid=CjwKCAjwy8i0BhAkEiwAdFaeGPngI6QUG2MbtXkZJg9Zr10fg__W5pp7QXcpx8d4QRaPuV4eEgxCmhoCZ1MQAvD_BwE
Product Name
Semiconductor Refrigeration PlateModel
XD-1037Power Supply Voltage
DC12VEnergy consumption
60WShipping Weight 0.4 kg
Shipping Dimensions 12 × 8 × 6 cm -
@adhanabal
Check out the I-parameter in M307 command
It will allow you to use peltier elements for cooling.
But I'm not sure, if autotuning will also work in inverted mode? M303 -
@o_lampe thank you ill check
-
The out0 terminal should be able to handle that.
-
@Phaedrux thank you