BLDC &encoder driver for a large laser cutter?

[flopes]

Do you suggest a BLDC &encoder driver for me to build a large laser cutter?
The motor should spin at about 100Hz and 1k ticks encoder
It seems the ODrive is not an option, according to some postings here
Thanks

[o_lampe]

@flopes There is the STM B_G431B_ESC board, which works with hardware-encoder for medium power BLDC motors.
It can be flashed with simpleFOC, which allows you to control the motor via step/dir interface by gcode directly or UART messages (for constant speed or torque use cases)