Solved 3.5rc4, 12864 display menu, M98

[mrac1]

Macro calls with M98 from a 12864 display menu does not work in 3.5rc4.

e.g.:
button R25 C1 F0 H0 V5 T"- Load" A"M98 P/macros/2_Load filament"

There is also no error message.

[dc42]

@mrac1 this is covered in one of the release notes for the 3.5 firmware series. Use two pairs of double quotes around the filename.

[mrac1]

Thank you, this works:

button R37 C1 F0 H0 V5 T"- Unload" A"M98 P""/macros/3_Unload filament"""