Problem with stepper motor for extruder
-
Hi, my duet2 wifi board is having issues with the stepper motor for extrusion. When I hit retract, it will extrude and when I hit retract it again, it will do the opposite and extrude. Extrude button is not working at all, and when I hit it the motor makes a humming/hissing sound but does not spin. I've already changed out the stepper cable motor and even ordered a new duet 2 wifi board which did not fix the issue.
-
Here is the config file for the stepper motors
-
Has it ever worked? Or is this a new build?
What are the specs of the motor? Have you tested with a different motor?Can you share the results of sending M122 and M98 P"config.g" in the gcode console?
