M486 string too long error

[JRDM]

My printer is running RRF 3.4.6 on a Duet 2.
I'm using an Orcaslicer 2 RC and it emits part names RRF doesn't like for M486 command.

The whole line:
M486 S0 A"Enclosure_Heater_Duct_for_Delta5020.stl_id_0_copy_0"

It doesn't halt printing. I haven't used part cancellation feature yet so maybe that would be a problem then.

I'm sure I can change the part names to something shorter but any chance in extending the allowed string length?

[dc42]

@JRDM I think the maximum length is already increased in RRF 3.5.