M291 messages. How to display them on LCD?

DR8

Hi,

Inside my macros I'm using M291 to display messages and waiting for response. But this are sown only on my web page not on PanelDue also. How can I make it work?
Thanks!

dc42

You will need to wait for the next PanelDue firmware revision.

DR8

Awesome. Thanks alot!

Rob65

@dc42:

the next PanelDue firmware revision.

next meaning 1.18 or later I guess - on version 1.17 the M291 command does not work.

I had an M291 P"message" S3 command in a macro and this has a disastrous effect on functionality.
As soon as I execute the macro, the status line at the top of the display shows "busy" and from that moment on I cannot access the SD1 card from the PanelDue anymore.

Any idea on a release date for a new firmware revision supporting this?

I just configured some macros to deploy and retract a probe; this requires some manual intervention on my machine so I use the M291 command - works great from the web interface.

Rob