1LC v1.0 120R Resistors 1/2w or 1/4w or 1w?
-
Have old 1LC ver 1.0 going to use it for a 4th extruder on my 4 into 1 mixer Bowden (total 8 motors on mini 5). I guess I need a 5amp fuse and add a 120r Resistor, but I’m not into to these things. I have found ones that say 120R and looks like picture but I have too choose between 1/2w or 1/4w or 1w? Any idea? Documents only show 120R.
Thanks!
`mike -
@gallaghersart of you mean a 120R resistor to terminate the CAN bus, 1/4W is more than adequate.
