Restore temperature saved by G60 Sn

[Nazar]

Hello,

Is there a way to restore the tool temperature that was saved during pause.g, like for example with a fan with M116 Rn or a tool with T Rn?

I want to reduce the temperature by 100 deg C during pause.g and restore it in resume.g but I do not want to create any global variables for that.

Thanks

[dc42]

@Nazar you could set the standby temperature to 100C less than the active temperature in pause.g and then either deselect the tool or set the tool heaters to standby. Then reselect the tool or set the tool heaters to active in resume.g.