Problems changing extrusion multiplier with PanelDue
-
Ok I am running the DWF with a DueX2 and a 4.3'' PanelDue with Firmware 1.16.
I have two tools and recently I wanted to change the extrusion multiplier while printing with both tools.
But it didn't work. I hit the "100" of the second tool and adjusted the multiplier and then hit "SET". I saw for a second the multiplier chaning but then going back to "100" but the multiplier of the first tool changed instead. At least it showed that number…Changing with the WebIF works so...
-
Thanks for the report. I know I've fixed this in the source code already, but I can't remember whether the fix is in the current live version (1.17) or waiting for the 1.18 release. I think it's waiting for 1.18.
-
Cool I knew there was a newer version but the release notes didn’t contain anything interesting for me so I didn’t update yet…
