Getting actual spindle speed from "M3 R1" Mcode

CthulhuLabs

Sorry I was mistaken. My code is not getting executed. It is still throwing this error:

Error: {state.restorePoints[0].spindleSpeeds[0]}unknown value 'spindleSpeeds^' of resume.g

to the console and my code is NOT getting executed.

dc42

@CthulhuLabs currently the state saved in a restore point does not include the spindle speed(s). So I suggest that in pause.g you save the spindle speed in a global variable as @chrishamm suggested.

CthulhuLabs

@dc42 ahhh I saw it in the object model:

https://github.com/Duet3D/RepRapFirmware/wiki/Object-Model-Documentation#staterestorepointsspindlespeeds

that is a good alternative though. So I should do something like:

set global.PauseRPM = spindles[0].active

CthulhuLabs

Well "set global.PauseRPM = spindles[0].active" is evaluating to 0 so something is not right there. Also when I resume it is moving to the position it paused at which is good but it is not completing the tool path. Instead it is prompting me to change tools and continues on with the next tool path.

CthulhuLabs

I commented out all the code in pause.g and resume.g related to the spindle and it is still skipping the rest of the tool path on resume.

CthulhuLabs

I fixed the toolpath issue. My CAD software post processor was generating tool paths like this:

G1Z-1.016F304.8
X-163.747Y-122.162F1524.0
X-162.316Y-123.371
X-160.765Y-124.590
X-159.269Y-125.682
X-157.679Y-126.760
X-156.063Y-127.774
X-154.436Y-128.716
X-152.260Y-129.862
X-152.125Y-129.929
X-149.886Y-130.974
X-147.582Y-131.923
X-145.238Y-132.763
X-145.096Y-132.810
X-142.726Y-133.532
X-140.273Y-134.157

I switched it to generate tool paths like this:

G1Z-1.016F304.8
G1X-163.747Y-122.162F1524.0
G1X-162.316Y-123.371
G1X-160.765Y-124.590
G1X-159.269Y-125.682
G1X-157.679Y-126.760
G1X-156.063Y-127.774
G1X-154.436Y-128.716
G1X-152.260Y-129.862
G1X-152.125Y-129.929
G1X-149.886Y-130.974
G1X-147.582Y-131.923
G1X-145.238Y-132.763
G1X-145.096Y-132.810
G1X-142.726Y-133.532
G1X-140.273Y-134.157

I guess resume doesn't know how to pick up in the middle of a G1/0 command.

As for the M5 and M3 I think I am going to make my dsf-python script save the spindle speed to an internal LastRPM variable on M5 and restore that when it gets an M3 R1. Ill let you know if that works.

CthulhuLabs

That did it. @chrishamm @dc42 thank you for your help.

CthulhuLabs

Incase someone finds this thread and is looking to do something similar here is my dsf-python script for controlling my ODrive Spindle:

#!/usr/bin/env python3
"""
Script for controlling an ODrive powered BDLC spindle
"""

import subprocess
import traceback

from dsf.connections import InterceptConnection, InterceptionMode, CommandConnection
from dsf.commands.code import CodeType
from dsf.commands.generic import evaluate_expression
from dsf.commands.code_channel import CodeChannel
from dsf.object_model import MessageType

import serial
from time import sleep

port = '/dev/ttyACM0'   # serial port
baud = 115200           # baudrate
timeout = 1             # read timeout
LastRPS = 0             # What the spindle speed was in RPS before the last M5 was called


# function to return the serial port or none if it fails
def getSerial(portname,baud,to):
    try:
        return serial.Serial(port=portname,baudrate=baud,timeout=to)
    except:
        return None


# function to set the ODrive rps (Rotations Per Second#)
def setRPS(rps):
    attempt = True
    while attempt:
        ser = getSerial(port,baud,timeout)
        if (ser is not None):
            # get the current state of the ODrive
            ser.write(b'r axis0.current_state\n')
            axisState = ser.readline().decode().strip()

            # get the currently set velocity in RPS
            ser.write(b'r axis0.controller.input_vel\n')
            reqVel = ser.readline().decode().strip()

            # check if ODrive is ideal and the desired rps is not 0
            if (( axisState == "1" ) and ( rps != 0 )):
                # if so set the ODrive state to 8 (CLOSED LOOP CONTROL)
                ser.write(b'w axis0.requested_state 8\n')
                ser.flush()

            # check if ODrive is not ideal and the desired rps is 0
            if (( axisState != "1" ) and ( rps == 0)):
                # if so set the ODrive state to 1 (IDLE)
                ser.write(b'w axis0.requested_state 1\n')
                ser.flush()

            # check if the current set velocity is not the desired rps
            if ( float(reqVel) != rps ):
                # if so set the velocity to rps
                command = str.encode('w axis0.controller.input_vel %.6f\n' %rps )
                ser.write(command)
                ser.flush()

            ser.close()
            attempt = False
        else:
            sleep(0.1)


# function to get the ODrive rps (Rotations Per Second#)
def getRPS():
    attempt = True
    rps = 0
    while attempt:
        ser = getSerial(port,baud,timeout)
        if (ser is not None):
            # get the currently set velocity in RPS
            ser.write(b'r axis0.controller.input_vel\n')
            rps = float(ser.readline().decode().strip())

            ser.close()
            attempt = False
        else:
            sleep(0.1)

    return rps



def getRRFVar( dsf_variable, channel):
    command_connection = CommandConnection(debug=True)
    command_connection.connect()

    try:
        res = command_connection.perform_command(evaluate_expression( channel, dsf_variable ))
        result = res.result
        print(f"Evaluated expression: {result}")
    finally:
        command_connection.close()

    return result


def start_intercept():
    filters = ["M3","M4","M5"]
    intercept_connection = InterceptConnection(InterceptionMode.PRE, filters=filters, debug=True)

    while True:
        intercept_connection.connect()

        try:
            while True:
                # Wait for a code to arrive
                cde = intercept_connection.receive_code()

                # Check for the type of the code
                if cde.type == CodeType.MCode and cde.majorNumber in [3,4,5]:
                    # --------------- BEGIN FLUSH ---------------------
                    # Flushing is only necessary if the action below needs to be in sync with the machine
                    # at this point in the GCode stream. Otherwise it can an should be skipped

                    # Flush the code's channel to be sure we are being in sync with the machine
                    success = intercept_connection.flush(cde.channel)

                    # Flushing failed so we need to cancel our code
                    if not success:
                        print("Flush failed")
                        intercept_connection.cancel_code()
                        continue
                    # -------------- END FLUSH ------------------------

                    # M3
                    if cde.majorNumber == 3 :
                        if cde.parameter("R") :
                            if LastRPS < 0 :
                                # this is M3 LastRPS should be positve
                                setRPS( LastRPS * -1 )
                            else :
                                setRPS( LastRPS )
                            intercept_connection.resolve_code(MessageType.Success, "ODrive resuming RPM " + str( LastRPS * 60 ) )
                        else :
                            if cde.parameter("S") is None :
                                # Let DCS know there was an ERROR
                                intercept_connection.resolve_code(MessageType.Error, "M3 must include an S parameter")
                            else :
                                rpm = cde.parameter("S").string_value
                                if cde.parameter("S").is_expression :
                                    rpm = getRRFVar( rpm, cde.channel )
                                setRPS( float(int(rpm) / 60) )
                                # Resolve it so that DCS knows we took care of it
                                intercept_connection.resolve_code(MessageType.Success, "ODrive RPM set to " + str(rpm) )

                    # M4
                    if cde.majorNumber == 4:
                        if cde.parameter("R") :
                            if LastRPS > 0 :
                                # this is M4 LastRPS should be negative
                                setRPS( LastRPS * -1 )
                            else :
                                setRPS( LastRPS )
                            intercept_connection.resolve_code(MessageType.Success, "ODrive resuming RPM " + str( LastRPS * 60 ) )
                        else :
                            if cde.parameter("S") is None :
                                # Let DCS know there was an ERROR
                                intercept_connection.resolve_code(MessageType.Error, "M4 must include an S parameter")
                            else :
                                rpm = cde.parameter("S").string_value
                                if cde.parameter("S").is_expression :
                                    rpm = getRRFVar( rpm, cde.channel )
                                setRPS( -( float(int(rpm) / 60) ) )
                                # Resolve it so that DCS knows we took care of it
                                intercept_connection.resolve_code(MessageType.Success, "Ordive RPM set to -" + str(rpm) )

                    # M5
                    if cde.majorNumber == 5:
                        LastRPS = getRPS()
                        setRPS( 0 )
                        # Resolve it so that DCS knows we took care of it
                        intercept_connection.resolve_code(MessageType.Success, "ODrive RPM set to 0")
                else:
                    # We did not handle it so we ignore it and it will be continued to be processed
                    intercept_connection.ignore_code()
        except Exception as e:
            print("Closing connection: ", e)
            traceback.print_exc()
            intercept_connection.close()

        sleep(5)


if __name__ == "__main__":
    start_intercept()

dc42

@CthulhuLabs said in Getting actual spindle speed from "M3 R1" Mcode:

I guess resume doesn't know how to pick up in the middle of a G1/0 command.

Yes, that will be the reason. When you pause the print, RRF may cancel some moves that are in the movement queue. When you resume, RRF rewinds the input file back to the offset in that file of the first movement command that was cancelled. However, RRF doesn't know the context of that move, for example whether it is following on from a G0, G1, G2, G3 or some other command.

I have raised https://github.com/Duet3D/RepRapFirmware/issues/871.

dc42 created this issue in Duet3D/RepRapFirmware

open Problem with pausing in CNC or Laser mode #871

CthulhuLabs

@dc42 Would you like me to send you the original GCode file I was using before I altered the post processor? Each tool path is just one giant G1 Gcode.