Saving with M500

[ArekRucki]

Hi All,

I've just made my very first delta autocalibration. Everything went well except saving with M500.
When I look at the directory with system files on DWC after sending M500 there is no config-override.g.
I thought it is created automatically by sending M500.

Edit:
The file config-override.g was created after rebooting Duet.
Is this always like this?
Are the new values stored in config-override once I send M500?
Or stored in memory and appear in config-override after reboot?

Greetings,
Arek Rucki

[dc42]

@ArekRucki it probably created the config-override.g but DWC didn't show it. Pressing the Refresh button above the file list in DWC would have fixed that.

[ArekRucki]

@dc42
Thank you