Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    No WiFi signal strength : Duet WiFi Server Version: 2.1beta2

    Scheduled Pinned Locked Moved Solved
    Beta Firmware
    2
    2
    125
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • OwenDundefined
      OwenD
      last edited by

      When updating the WiFi server to 2.1beta2 the WiFi signal remains at zero
      M122 reports of old and new WiFi server versions for comparison

      Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.5beta1+ (2023-01-20)
      Duet WiFi Server Version: 2.1beta2

      M122

      RepRapFirmware for Duet 2 WiFi/Ethernet version 3.5beta1+ (2023-01-20 21:58:22) running on Duet WiFi 1.02 or later
Board ID: 08DGM-917NK-F2MS4-7J1DA-3S86T-TZTWD
Used output buffers: 23 of 26 (23 max)
=== RTOS ===
Static ram: 22188
Dynamic ram: 79136 of which 0 recycled
Never used RAM 8644, free system stack 192 words
Tasks: NETWORK(notifyWait,10.9%,233) ACCEL(notifyWait,0.0%,348) HEAT(notifyWait,0.0%,336) Move(notifyWait,0.0%,362) MAIN(running,87.7%,490) IDLE(ready,1.4%,30), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:01:04 ago, cause: software
Last software reset at 2023-01-21 12:03, reason: User, Gcodes spinning, available RAM 7080, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x08
Aux0 errors 0,0,0
Step timer max interval 0
MCU temperature: min 31.7, current 32.4, max 32.8
Supply voltage: min 0.4, current 0.5, max 0.5, under voltage events: 0, over voltage events: 0, power good: no
Heap OK, handles allocated/used 99/15, heap memory allocated/used/recyclable 2048/384/116, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: ok, SG min n/a
Driver 1: ok, SG min n/a
Driver 2: ok, SG min n/a
Driver 3: ok, SG min n/a
Driver 4: ok, SG min n/a
Driver 5: 
Driver 6: 
Driver 7: 
Driver 8: 
Driver 9: 
Driver 10: 
Driver 11: 
Date/time: 2023-01-21 16:30:27
Cache data hit count 2714556405
Slowest loop: 6.10ms; fastest: 0.13ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 0.9ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
no step interrupt scheduled
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Movement locks held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Q0 segments left 0
Code queue 0 is empty
=== Filament sensors ===
Extruder 0 sensor: ok
=== Network ===
Slowest loop: 18.91ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 1 of 8
= WiFi =
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 2.1beta2
WiFi MAC address bc:dd:c2:89:a0:bb
WiFi Vcc 3.38, reset reason Power up
WiFi flash size 4194304, free heap 34588
WiFi IP address 192.168.1.163
WiFi signal strength 0dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0

      Board: Duet 2 WiFi (2WiFi)
      Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.5beta1+ (2023-01-20)
      Duet WiFi Server Version: 1.27

      M122

      RepRapFirmware for Duet 2 WiFi/Ethernet version 3.5beta1+ (2023-01-20 21:58:22) running on Duet WiFi 1.02 or later
Board ID: 08DGM-917NK-F2MS4-7J1DA-3S86T-TZTWD
Used output buffers: 1 of 26 (24 max)
=== RTOS ===
Static ram: 22188
Dynamic ram: 79136 of which 0 recycled
Never used RAM 8644, free system stack 192 words
Tasks: NETWORK(notifyWait,16.0%,146) ACCEL(notifyWait,0.0%,348) HEAT(notifyWait,0.0%,330) Move(notifyWait,0.0%,362) MAIN(running,83.9%,490) IDLE(ready,0.0%,30), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:05:37 ago, cause: software
Last software reset at 2023-01-21 12:03, reason: User, Gcodes spinning, available RAM 7080, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x08
Aux0 errors 0,0,0
Step timer max interval 0
MCU temperature: min 31.7, current 32.3, max 32.7
Supply voltage: min 0.4, current 0.5, max 0.5, under voltage events: 0, over voltage events: 0, power good: no
Heap OK, handles allocated/used 99/15, heap memory allocated/used/recyclable 2048/384/116, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: ok, SG min n/a
Driver 1: ok, SG min n/a
Driver 2: ok, SG min n/a
Driver 3: ok, SG min n/a
Driver 4: ok, SG min n/a
Driver 5: 
Driver 6: 
Driver 7: 
Driver 8: 
Driver 9: 
Driver 10: 
Driver 11: 
Date/time: 2023-01-21 16:34:59
Cache data hit count 4294967295
Slowest loop: 21.61ms; fastest: 0.06ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 1.0ms, write time 22.1ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
no step interrupt scheduled
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Movement locks held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Q0 segments left 0
Code queue 0 is empty
=== Filament sensors ===
Extruder 0 sensor: ok
=== Network ===
Slowest loop: 1208.00ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 1 of 8
= WiFi =
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.27
WiFi MAC address bc:dd:c2:89:a0:bb
WiFi Vcc 3.38, reset reason Power up
WiFi flash size 4194304, free heap 23272
WiFi IP address 192.168.1.163
WiFi signal strength -43dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
      dc42undefined 1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators @OwenD
        last edited by

        @OwenD this is a known issue, fixed in the next beta.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • OwenDundefined OwenD marked this topic as a question
        • OwenDundefined OwenD has marked this topic as solved
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA