Auto Bed Leveling Mesh made easy??
-
Argh, so frustrating!
Everywhere I look it’s seems you only get part of the story to fix your issue, only to find that you need some other special setting….
Here is a question. Why can’t there be a simple webpage that helps to auto generate the code you need to copy paste into your config file(etc.?)
Kinda like the one I’ve used to create the bed.g file (which didn’t help because it’s didn’t account for my probe offset).
Surely there mush be a way to make this much easier than it is trying to find all the pieces in the puzzle hidden in all of the forum??
For example, it could would like the reprap config tool.
Have it ask what size your bed is; what type of printer it’s is; what’s your probe offset; what is your axis limits considering your prob(or other equipment attached to your print head).; what duet board are you using; then, when you’ve put all of this in, it generates all the settings you need to copy/paste and where.
Surely there has got to be a way to do this??
Anyway, onto my issue. I have FINALLY figured out how to complete my first successful G29 without my probe going off the bed (had to minus the offset on the map limits). But that’s where the advice I’ve found stops.
Nothing about what to do when your height map is not centered on your bed, but offset because of the parameters you put in for the map to compensate for the offset.
there doesn’t seem to be any topics that speak on how to correct this either.
If someone could create a tool like this, it’d be a massive public service!
Little help?
-
@Damien said in Auto Bed Leveling Mesh made easy??:
Nothing about what to do when your height map is not centered on your bed, but offset because of the parameters you put in for the map to compensate for the offset.
I don't understand what you mean by this part. Can you give us some more information? Showing your gcode files would be helpful as well. config.g, homing files, bed.g. Maybe a screenshot of your height map as it is displayed now.