Solved Error - Probe was not triggered

[Sculpt Fabricator]

Duet 2 Wifi Duex 5 ver 3.4.1

Everything has been working fine for months, until we lost power last night.
Now when we try to run a Tilt Bed Calibration or a Bed Mesh, we get an
Error- Probe was not triggered during probing move, but watching it, the probe is deploying and working.
Any suggestions ? Thanks

[Sculpt Fabricator]

@Sculpt-Fabricator We figured it out. one of the corners was out just enough that even though
the probe was working it wasn't probing when it thought it should be. We did a manual calibration and now
working fine.