PanelDue Firmware 3.4.1 released

mfs12

Hey,

new version of Paneldue Firmware was released.

Release Notes

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

M291 S3 message not cleared
Fix m291 jogging axes shown
Add support for QOI thumbnails in gcode files (supports one QOI image with max size 160x160)
- https://github.com/phoboslab/qoi/

improved file detail popup layout
use faster stack size calculation when not debugging
updated RRFLibrary
added CRC16 to gcode request
- by default CRC16 is enabled
- added option to disable checksum and CRC16 in gcode requests
improved m291 jogging layout
fixed m291 axis selection handling

os1r1s

@mfs12 This is awesome! Will it pick the correct QOI image if there are two embedded in the gcode?

mfs12

@os1r1s, it takes the last qoi image transmitted.

Mike3D

I like to see the Dutch translation.
If i need to help................ i am Dutch.

droftarts

@Mike3D Thanks for offering your services!
See this thread: https://forum.duet3d.com/topic/24515/integrate-polish-translation/
This text file lists all the different on-screen words that need translation (this one is Polish): polish-translation-0.3.txt

I think if you can translate them, and post a translated text file back here, @mfs12 can integrate it.

Ian

Mike3D

Thanks for the file.
I have made a Dutch translation.
1644677487089-dutch-translation-.txt

Feel free to ask if the text is to long.

droftarts

@Mike3D Great, thanks! Hopefully @mfs12 can integrate it into the next release.

Ian

mfs12

I have made a Dutch translation.
1644677487089-dutch-translation-.txt
Feel free to ask if the text is to long.

Created an github issue.

mfs12 created this issue in Duet3D/PanelDueFirmware

mfs12

thanks for providing the dutch translation. It took a while, but finally I integrated it.

Meanwhile there were some other changes, perhaps you could review and update if needed.

Please check the linked file.