Extract temp to external display

[tecno]

@DIY-O-Sphere

Tried those settings also, next to be a pin detective and see if there is something in wireing.

Thanks for help, appreciated.

Will try more tomorrow.

[tecno]

Pinout seems to be OK.

Is this display 5V and not compatible with Mini5+ ?

[tecno]

Why is there no DISPLAY in the left menu?

[DIY-O-Sphere]

@tecno
It's under System. Have a look at the screenshot I have posted yesterday.

[dc42]

@tecno did you get it working?

[tecno]

@dc42

Unfortunately no

[tecno]

Is there anybody out there (Pink Floyd) that can help me?

[DIY-O-Sphere]

@tecno
Can we have some picures of the wiring?

[tecno]

@DIY-O-Sphere
Std 10 pin cables Exp1 to Exp1 and Exp2 to Exp2

[tecno]

Had a look again on how cables are keyed as I did not get any life at all. F-ng assembly from the chinese as turning cables 180° I now get backlight and encoder lit up but nothing on screen.

[tecno]

[DIY-O-Sphere]

@tecno
As far as I can tell from the picture, turning is required for exp1 but not for exp2.

[DIY-O-Sphere]

@tecno
Perfect...

[tecno]

@DIY-O-Sphere

So now my mini 12864 is working

Next is to get my old RepRapDiscount to work. So how to read the silkscreen on board as regards cable keying?

[DIY-O-Sphere]

@tecno

[tecno]

@DIY-O-Sphere
I interpret the white markings as the cable keying and that is 180° yet another twisted cable, right?

[dc42]

@tecno please note, the RepRapDiscount controllers require 5V signals, so they are unlikely to work reliably with the 3.3V signals from the Duet 3 Mini. That's why we suggest the Mini 12864 display.

[tecno]

@dc42
Yes I am aware of that. I assume only EXP1 needs level shifters on LCD_CS/SCK/MOSI ?

[tecno]

Lots of digging I found this:

https://forum.duet3d.com/post/236985

Looks like PCR is not here so where can I find 3pcs of this board?

[tecno]

Does anybody know if these boards are still available?

A bit of time wasted to CAD new board if original is to be found.