Auto bed leveling weirdness
-
I use a 4 Z rod machines, for a while its working fine. Today I start the machine, and ran into the error in the picture. Its goes always in a 0,4mm zone but for understandably reasons thats not acceptable.
https://drive.google.com/file/d/0B8gTElAzeWk1bVF6THhQVjg5NHM/view?usp=sharing -
Which firmware version are you using? There was a bug in the code for 4-leadscrew correction, which was fixed in firmware 1.20beta1.
-
1.19 /1.19.2 since these was marked as latest stable. Should I upgrade to 1.20b1 then?
-
Yes, or 1.20b4.
-
1.19.3 webcontrol as well, or thats nothing?
-
Yes, 1.19.3 DWC is recommended (it works with 1.19.2 RRF as well).
