CPU temp gone missing with 1.20beta1
-
I got around to adding a fan to my cpu enclosure, and went to check cpu temp, but noticed it has gone missing from the Machine Properties page. I haven't jumped ship to the second beta because of noted issues for corexy, was wondering if this was oversight, me just not knowing where to look etc.
-
Locate the "Tools / Heaters / Extra" tab and clic on "Extra".
MCU temp should be there. -
no such tabs exist, maybe its because of the alpha version of web server 1.20alpha1 which was a requirement of the firmware beta.
-
Check which version of DWC you are running. If it's 1.19.3 then the Extra link will definitely be there, near the top left corner, just below the "Send GCode" box.
-
here is my current install:
Software Information
Firmware Name: RepRapFirmware for Duet WiFi
Firmware Electronics: Duet WiFi 1.0
Firmware Version: 1.20beta4 (2017-10-28)
WiFi Server Version: 1.20beta2
Web Interface Version: 1.19.3
Web Interface by Christian Hammacher
Licensed under the terms of the GPL v3
Dark theme kindly provided by Fotomasand here is a picture of the tools menu
https://imgur.com/a/tqw8ySo I think i have the latest everything, including the DuetWebControl 1.19.3, still no extra menu…
-
I can see the "Extra" link near the top left in your image. You don't need to be on the Tools menu to get it, it's in the common area.
-
doh, thank you for your patience with dolt users like me sometimes, totally misread where to look.
-
No problem, if I saw "Tools / Heaters / Extra" mentioned, I would assume that the"/" meant a sub-menu. But in this case, it didn't.
