Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    slow upload

    Scheduled Pinned Locked Moved
    Duet Web Control
    2
    2
    158
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Adamfilipundefined
      Adamfilip
      last edited by Adamfilip

      Noticing very slow upload speeds. and getting disconnects ofen

      Recently (weeks ago) changed SD card and Speed test shows 2.2mbps

      If I restart the board, upload speeds is fine again around 500kbps.

      15bfa3dc-fd6d-4903-9c2f-5381e86bb111-image.png

      error log

      Z: none
power up + 00:00:00 [warn] Error: in file macro line 105: M581: missing parameter 'T'
power up + 00:00:00 [warn] Error: Accelerometer not found on specified port
power up + 00:00:00 [info] G10 P0 X0 Y0 Z0                                  
power up + 00:00:00 [info] G10 P0 R0 S0                                     
power up + 00:00:00 [debug] Done!
power up + 00:00:00 [debug] RepRapFirmware for Duet 2 WiFi/Ethernet is up and running.
power up + 00:00:01 [warn] WiFi module started
power up + 00:00:06 [warn] WiFi module is connected to access point Filipogeco, IP address 192.168.0.195
power up + 00:00:07 [warn] HTTP client 192.168.0.40 login succeeded
2022-09-04 20:43:39 [warn] Date and time set at power up + 00:00:07
2022-09-04 20:43:39 [warn] HTTP client 192.168.0.207 login succeeded
2022-09-04 20:45:03 [debug] === Diagnostics ===
2022-09-04 20:45:03 [debug] RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.2rc3+ (2022-08-31 12:50:46) running on Duet WiFi 1.02 or later + DueX5
2022-09-04 20:45:03 [debug] Board ID: 08DLM-996RU-N85T0-6JKF2-3SJ6Q-1AVVR
2022-09-04 20:45:03 [debug] Used output buffers: 1 of 26 (23 max)
2022-09-04 20:45:03 [debug] === RTOS ===
2022-09-04 20:45:03 [debug] Static ram: 23860
2022-09-04 20:45:03 [debug] Dynamic ram: 75752 of which 40 recycled
2022-09-04 20:45:03 [debug] Never used RAM 12356, free system stack 152 words
2022-09-04 20:45:03 [debug] Tasks:
2022-09-04 20:45:03 [debug]  NETWORK(ready,23.4%,211)
2022-09-04 20:45:03 [debug]  HEAT(notifyWait,0.0%,333)
2022-09-04 20:45:03 [debug]  Move(notifyWait,0.0%,304)
2022-09-04 20:45:03 [debug]  DUEX(notifyWait,0.0%,24)
2022-09-04 20:45:03 [debug]  MAIN(running,75.7%,446)
2022-09-04 20:45:03 [debug]  IDLE(ready,0.9%,30)
2022-09-04 20:45:03 [debug] , total 100.0%
Owned mutexes:
2022-09-04 20:45:03 [debug] === Platform ===
2022-09-04 20:45:03 [debug] Last reset 00:01:32 ago, cause: software
2022-09-04 20:45:03 [debug] Last software reset at 2022-09-04 20:43, reason: User, GCodes spinning, available RAM 9036, slot 2
2022-09-04 20:45:03 [debug] Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
2022-09-04 20:45:03 [debug] Error status: 0x00
2022-09-04 20:45:03 [debug] Step timer max interval 0
2022-09-04 20:45:03 [debug] MCU temperature: min 34.5, current 35.3, max 35.7
2022-09-04 20:45:03 [debug] Supply voltage: min 24.0, current 24.2, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
2022-09-04 20:45:03 [debug] Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
2022-09-04 20:45:03 [debug] Events: 0 queued, 0 completed
2022-09-04 20:45:03 [debug] Driver 0: standstill, SG min n/a
2022-09-04 20:45:03 [debug] Driver 1: standstill, SG min n/a
2022-09-04 20:45:03 [debug] Driver 2: standstill, SG min n/a
2022-09-04 20:45:03 [debug] Driver 3: standstill, SG min n/a
2022-09-04 20:45:03 [debug] Driver 4: standstill, SG min n/a
2022-09-04 20:45:03 [debug] Driver 5: standstill, SG min 0
2022-09-04 20:45:03 [debug] Driver 6: standstill, SG min 0
2022-09-04 20:45:03 [debug] Driver 7: standstill, SG min 0
2022-09-04 20:45:03 [debug] Driver 8: standstill, SG min 0
2022-09-04 20:45:03 [debug] Driver 9: standstill, SG min n/a
2022-09-04 20:45:03 [debug] Driver 10: 
2022-09-04 20:45:03 [debug] Driver 11: 
2022-09-04 20:45:03 [debug] Date/time: 
2022-09-04 20:45:03 [debug] 2022-09-04 20:45:03
2022-09-04 20:45:03 [debug] Cache data hit count 3337100654
2022-09-04 20:45:03 [debug] Slowest loop: 20.33ms; fastest: 0.18ms
2022-09-04 20:45:03 [debug] I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
2022-09-04 20:45:03 [debug] === Storage ===
Free file entries: 9
2022-09-04 20:45:03 [debug] SD card 0 detected, interface speed: 20.0MBytes/sec
2022-09-04 20:45:03 [debug] SD card longest read time 1.0ms, write time 7.2ms, max retries 0
2022-09-04 20:45:03 [debug] === Move ===
DMs created 83, segments created 3, maxWait 12739ms, bed compensation in use: none, comp offset 0.000
2022-09-04 20:45:03 [debug] === MainDDARing ===
Scheduled moves 1, completed 1, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 1], CDDA state -1
2022-09-04 20:45:03 [debug] === AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
2022-09-04 20:45:03 [debug] === Heat ===
2022-09-04 20:45:03 [debug] Bed heaters 0 -1 -1 -1, chamber heaters 2 -1 -1 -1, ordering errs 0
2022-09-04 20:45:03 [debug] === GCodes ===
2022-09-04 20:45:03 [debug] Segments left: 0
2022-09-04 20:45:03 [debug] Movement lock held by null
2022-09-04 20:45:03 [debug] HTTP is idle in state(s) 0
2022-09-04 20:45:03 [debug] Telnet is idle in state(s) 0
2022-09-04 20:45:03 [debug] File is idle in state(s) 0
2022-09-04 20:45:03 [debug] USB is idle in state(s) 0
2022-09-04 20:45:03 [debug] Aux is idle in state(s) 0
2022-09-04 20:45:03 [debug] Trigger is idle in state(s) 0
2022-09-04 20:45:03 [debug] Queue is idle in state(s) 0
2022-09-04 20:45:03 [debug] LCD is idle in state(s) 0
2022-09-04 20:45:03 [debug] Daemon is idle in state(s) 0
2022-09-04 20:45:03 [debug] Autopause is idle in state(s) 0
2022-09-04 20:45:03 [debug] Code queue is empty
2022-09-04 20:45:03 [debug] === DueX ===
Read count 1, 0.65 reads/min
2022-09-04 20:45:03 [debug] === Network ===
2022-09-04 20:45:03 [debug] Slowest loop: 146.51ms; fastest: 0.00ms
2022-09-04 20:45:03 [debug] Responder states:
2022-09-04 20:45:03 [debug]  HTTP(0)
2022-09-04 20:45:03 [debug]  HTTP(0)
2022-09-04 20:45:03 [debug]  HTTP(0)
2022-09-04 20:45:03 [debug]  HTTP(0)
2022-09-04 20:45:03 [debug]  FTP(0)
2022-09-04 20:45:03 [debug]  Telnet(0), 0 sessions
2022-09-04 20:45:03 [debug] HTTP sessions: 2 of 8
2022-09-04 20:45:03 [debug] = WiFi =
Network state is active
2022-09-04 20:45:03 [debug] WiFi module is connected to access point 
2022-09-04 20:45:03 [debug] Failed messages: pending 0, notready 0, noresp 0
2022-09-04 20:45:03 [debug] WiFi firmware version 1.27beta1
2022-09-04 20:45:03 [debug] WiFi MAC address 84:0d:8e:b2:f8:6f
2022-09-04 20:45:03 [debug] WiFi Vcc 3.32, reset reason Turned on by main processor
2022-09-04 20:45:03 [debug] WiFi flash size 4194304, free heap 24728
2022-09-04 20:45:03 [debug] WiFi IP address 192.168.0.195
2022-09-04 20:45:03 [debug] WiFi signal strength -41dBm, mode 802.11n, reconnections 0, sleep mode modem
2022-09-04 20:45:03 [debug] Clock register 00002002
2022-09-04 20:45:03 [debug] Socket states:
2022-09-04 20:45:03 [debug]  0
2022-09-04 20:45:03 [debug]  0
2022-09-04 20:45:03 [debug]  0
2022-09-04 20:45:03 [debug]  0
2022-09-04 20:45:03 [debug]  0
2022-09-04 20:45:03 [debug]  0
2022-09-04 20:45:03 [debug]  0
2022-09-04 20:45:03 [debug]  0
2022-09-04 20:45:30 [warn] HTTP client 192.168.0.40 login succeeded
2022-09-04 20:45:30 [warn] HTTP client 192.168.0.207 login succeeded
2022-09-04 20:46:19 [warn] HTTP client 192.168.0.40 login succeeded
2022-09-04 20:46:20 [warn] HTTP client 192.168.0.207 login succeeded
2022-09-04 20:46:32 [warn] HTTP client 192.168.0.40 login succeeded
2022-09-04 20:46:34 [warn] HTTP client 192.168.0.207 login succeeded

      === Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.2rc3+ (2022-08-31 12:50:46) running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DLM-996RU-N85T0-6JKF2-3SJ6Q-1AVVR
Used output buffers: 1 of 26 (23 max)
=== RTOS ===
Static ram: 23860
Dynamic ram: 75752 of which 40 recycled
Never used RAM 12356, free system stack 152 words
Tasks: NETWORK(ready,23.4%,211) HEAT(notifyWait,0.0%,333) Move(notifyWait,0.0%,304) DUEX(notifyWait,0.0%,24) MAIN(running,75.7%,446) IDLE(ready,0.9%,30), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:01:32 ago, cause: software
Last software reset at 2022-09-04 20:43, reason: User, GCodes spinning, available RAM 9036, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 0
MCU temperature: min 34.5, current 35.3, max 35.7
Supply voltage: min 24.0, current 24.2, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min n/a
Driver 1: standstill, SG min n/a
Driver 2: standstill, SG min n/a
Driver 3: standstill, SG min n/a
Driver 4: standstill, SG min n/a
Driver 5: standstill, SG min 0
Driver 6: standstill, SG min 0
Driver 7: standstill, SG min 0
Driver 8: standstill, SG min 0
Driver 9: standstill, SG min n/a
Driver 10: 
Driver 11: 
Date/time: 2022-09-04 20:45:03
Cache data hit count 3337100654
Slowest loop: 20.33ms; fastest: 0.18ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 1.0ms, write time 7.2ms, max retries 0
=== Move ===
DMs created 83, segments created 3, maxWait 12739ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 1, completed 1, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 1], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters 2 -1 -1 -1, ordering errs 0
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== DueX ===
Read count 1, 0.65 reads/min
=== Network ===
Slowest loop: 146.51ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 2 of 8
= WiFi =
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.27beta1
WiFi MAC address 84:0d:8e:b2:f8:6f
WiFi Vcc 3.32, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 24728
WiFi IP address 192.168.0.195
WiFi signal strength -41dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        I see you're using the 3.4.2 RC3 which includes an updated wifi server 1.27 beta.

        Can you try flashing back to 3.4.1 using the full zip file to compare performance with the previous wifi server 1.26?

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA