RRF config tool won't add expansion boards
-
Hi there, new to RRF. I'm trying to configure a Duet 3 mini 5+ and add in the TOOL1LC expansion board. There are multiple expansion boards listed but it will not allow me to select any of them. Is this a glitch? How do I proceed?
Thanks!
-
@aquaticlife The config tool was updated yesterday, and a bug seems to have been introduced, sorry. One for @chrishamm to fix.
Ian
Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard
-
This post is deleted! -
@herve_smith Have selected a pin under I/O mapping? Without those you can't select endstops or z probe but you can when set.
The first fan is the part cooling fan and so not suitable for this.
Follow my adventures in 3D Printing, laser cutting and electronics. https://linktr.ee/Rushmere3D
-
This post is deleted! -
@herve_smith What duet board?
-
@herve_smith I’ve checked, and making valid choices for output pins on the I/O mapping page, using Mini 5+, all of the things you note as unselectable are selectable. There’s still an issue adding expansion boards, though. See the configuration guide for guidance using the config tool: https://docs.duet3d.com/en/How_to_guides/Configuring_firmware
Ian
-
@droftarts Do you know approximately how long it'll be before the bug fix? I have a number of other things to do to my printer in the meantime, just not sure if its a days, weeks, months, kind of thing. Cheers.
-
@aquaticlife ignore adding them in the config tool and do it manually. Other than setting up X Y Z with single motors you need to edit your config anyway. And its better to learn what's going on with the config than rely on something that's autogenerated
-
@aquaticlife I expect @chrishamm will fix it early in the week. For examples of configuration with expansion/toolboard, see https://docs.duet3d.com/User_manual/Machine_configuration/Configuration_cartesian
Ian
-
@droftarts it's working now. Super excited to get started!
