deployprobe.g for Euclid not running

fcwilt

@adamfilip

If you have two steppers for the Y axis why do they not appear in your M584 commands?

Normally it would look like this (based on the comments):

M584 X0 Y1:4 Z2 E3

Thanks.

Frederick

Adamfilip

@fcwilt actually I use too, its changed to only a signal Y.
sorry some old notes still linger

Adamfilip

@jay_s_uk yeah its weird.

I restarted the machine. did home all.
ran the macro and nothing.
not even the first echo statement showed up in console

Adamfilip

@adamfilip

I copied the entire deployprobe.g code into a macro and it runs on its own

so it seems like the deployprobe.g itself isnt being run when asked with
M401 P1 ;Deployprobe

fcwilt

@adamfilip

Just to provide another point of view.

I no longer home things as needed because I found I did not like homing taking place unexpectedly because I had tried to do something that required the printer to be homed, like mount the probe.

So now I just check that the printer is homed and abort if it is not.

I have a Euclid on one of my printers but I don't use the deploy/retract feature that is part of the firmware. I call my routines to mount/unmount the probe as needed. I have found that for normal operations I can keep the probe mounted except during actual printing. Any operation that needs the probe, such as setting the Z=0 Datum, mounts the probe and leaves it mounted. In the print start code just before actual printing begins the probe is unmounted.

Just food for thought.

Frederick

fcwilt

@adamfilip said in deployprobe.g for Euclid not running:

so it seems like the deployprobe.g itself isnt being run when asked with
M401 P1 ;Deployprobe

Doesn't the firmware track the state of the probe and only run the deploy/retract routines when it thinks it needs to?

Frederick

oliof

@adamfilip If the euclid is your only probe, drop the P1 and only run M401. Alternately, try P0 because your probe definition assignes ID 0.

Adamfilip

@oliof Thank you both M401 and M401 P0 worked!

Adamfilip

@adamfilip only other error im getting in console is

Probe Pickup complete
Warning: G3000: Command is not supported

Adamfilip

@adamfilip

G90                           ; absolute positioning
G0 X150 Y150 G3000            ; move to the center of the bed
M400                          ; wait for moves to finish

Adamfilip

@adamfilip probably just a typo and should be F